OPERATION
ZEISS
TFT display touchscreen on the Axio Observer 7, 7 materials
Axio Observer
130
431004-7244-001
12/2016
5.11.8
Microscope -> Incubation
The
Microscope -> Incubation
page is only
available for
Bio / Med
stand types. It contains the
two tabs
Incubation
and
Y module
.
These tabs are used to control incubation
components and thermostats connected to the
microscope.
5.11.8.1
Incubation
The
Incubation
tab lists all fitted incubation
components. Each button shows the target
(bottom) and actual (top) temperatures for
temperature control.
Click on the appropriate button to call up the
corresponding pop-up window (e.g.
H Insert P
). In
this window you can switch the temperature
control on or off and set a target temperature
value.
5.11.8.2
Y module
The
Y module
tab lists the thermostats connected
to the microscope. Each button shows the target
(bottom) and actual (top) temperatures for
temperature control.
In the same way as for incubation components,
thermostats can be switched on or off and target
temperatures can be set from the pop-up
thermostat window.
Fig. 116
Microscope -> Incubation ->
Incubation page
Fig. 117
Pop-up window„H Insert P“
Fig. 118
Microscope -> Incubation -> Y
module page
Содержание Axio Observer Series
Страница 1: ...Axio Observer Inverted microscope Operating manual...
Страница 192: ......