Zeiss AURA handheld NIR, Руководство по обслуживанию и ремонту

Страница: 3 / 38

3
AURA ® handheld NIR - Rev. 2
EN_40_070_0030I | AURA ® handheld NIR - Rev. 2 | Maintenance and Repair Manual
Table of content
1 About this manual 4
2 Safety 5
2.1 General safety notes 5
2.2 Information on environmental protection 6
2.3 Warranty and liability 6
3 Changing the display 8
4 Replacing the halogen lamp 14
5 Changing the lamp cable (optional) 16
6 Changing the motor 18
7 Calibrating the compensation data 27
8 Accessories and spare parts for AURA handheld NIR - Rev. 2 38
Contents
List of illustrations
Fig. 1 Remove battery (2298-971) 8
Fig. 2 Remove battery (2289-955) 9
Fig. 3 Remove the rubber display protectors 9
Fig. 4 Remove the slotted screws on the rear of the device 10
Fig. 5 Remove the Torx screws on the display side and lift out the display 11
Fig. 6 Disconnect the display cable 12
Fig. 7 Lay down the display 13
Fig. 8 Remove the lamp holder with halogen lamp 14
Fig. 9 Remove the halogen lamp 15
Fig. 10 Disconnect the lamp cable from the halogen lamp 16
Fig. 11 Disconnect the lamp cable from the circuit board 17
Fig. 12 Remove the fastening screws on the front panel 18
Fig. 13 Remove the front panel 19
Fig. 14 Remove the motor holder 20
Fig. 15 Dismantle the white reference assembly 21
Fig. 16 Pull out the motor with its cable 21
Fig. 17 Dismantle the semicular mount 22
Fig. 18 Mount the semicular mount 22
Fig. 19 Install new motor 23
Fig. 20 Attach the white reference assembly 23
Fig. 21 Install motor holder 24
Fig. 22 Lay the cable and insert the front panel 25
Fig. 23 Laying the cable - details 26
Fig. 24 Prepare device for calibration 28