Zehntner ZGM1130, Техническое руководство

Страница: 16 / 26

18. May 2021
© Copyright 2021, PROCEQ SA 12
Pass / Fail
Switches the Pass / Fail functionality for all supported
angles on or off.
20 ° 60 ° 85° & H
Lower and higher limits can be defined for each
supported angle individually. If the measured value is
below or above of these values the measured value will
be marked with a or .
Angles
Each supported angle can be turned on or off separately,
but only up to three angles at one time can be measured.
Please be aware that reflection haze is only
available on devices supporting 20° and 60°
measuring angles.
H = 60° value
– 20° value
Setup
Language
Choose one of the shown languages. The selected
language will be applied immediately.
Interval
Set-up the second function of the measure button. When
“Interval” is chosen, the device conducts measurements
in the given interval as long as the measuring button is
pressed. If the option “Off Switch” is chosen, the device
will turn off after holding the measuring button pressed for
3 seconds. The interval time can be set in the
corresponding menu.