35
3.3.2 Custom program
TO CHANGE THE PROGRAM, TURN THE DIAL TO PROG
The screen shows the program for day 1 (for example Monday). is displayed
against the day being programmed.
_ When the first timeslot (from midnight to 1am) blinks, press to select
COmFORT
mode or to select
ECO
mode.
_ You will move to the next timeslot automatically. Repeat until you have entered
settings for the entire day.
_ If you wish to make any corrections, cycle through all the timeslots until you
reach the one you want to change.
_ When you are ready, press
OK
to confirm your settings for the day and move to
the next day.
NOTE
To apply the same program for the following day, keep the
OK
button pressed
down for approximately 3 seconds until the program for the following day is
displayed.
TO REVIEW YOUR PROGRAM
Press the button repeatedly to review the start
times for the
COmFORT
and
ECONOmY
periods you
entered previously.
Press
OK
to move to the next day.
TURN THE DIAL TO EXIT THE PROGRAM FUNCTION.
Start of timeslot you are modifying
First timeslot
Select Economy for 1h
Select Comfort for 1h
Move to next day
Day you are modifying
Program profile for the day
you are modifying
Go to next program change
Review the various
or periods.
Start of timeslot displayed
E N
3.3 Programming the thermostat
The program function is used to schedule operation of the Eco ( ) and Comfort
( ) modes throughout the day.
The thermostat can be set to operate to the same program every day (daily
program) or to a different program each day (weekly program).
You can also switch your appliance to any desired mode ( or or )
manually using the dial at any time if your schedule changes.
3.3.1 Default program
TO VIEW THE PROGRAM, TURN THE DIAL TO PROG
On first use, the programmable thermostat is set to run the program “
COmFORT
from 6am to 11pm” every day of the week.
Default program profile:
– from midnight to 6am:
ECO
mode
– from 6am to 11pm:
COmFORT
mode
– from 11pm to midnight:
ECO
mode
Start of timeslot displayed
Move to next day
Day displayed
Program profile for day displayed
Go to next program change
E N
34
