Zehnder Rittling ComfoControl Luxe, Руководство по установке

Страница: 33 / 84

4 EN
Connection to external temper-
ature sensor
The temperature sensor specifica-
tion is: NTC 10 K
Ω
(optional).
The external temperature sensor is
optional. The indoor temperature
is usually monitored by an internal
temperature sensor (in the CC Luxe).
However, indoor temperature can
also be monitored using an external
temperature sensor. This may be be-
cause the CC Luxe is to be fitted in a
different location than the one to be
monitored, for example in the hall. It
is also possible that variables in the
vicinity of the unit (e.g. wall tempera-
ture) could affect temperature read-
ings. An external temperature sensor
connected to the PCB in the back of
the CC Luxe provides a solution to
these problems.
This is how an external temperature
sensor must be connected to the ven-
tilation unit:
1. Connect the temperature sensor
to the 'Relay 2' connector of the
CC Luxe.
2. Place both jumpers on the PCB
(above the connector of the tem-
perature sensor), to the left (posi-
tion 1:2).
5 Commissioning
Most of the CC Luxe factory settings
are correct. Still, you may want to ad-
just a number of things.
The CC Luxe can also be used to
commission the unit which it is con-
nected to. This can be done via the P
menus in the Settings > Service Login
menu. These P menus can be used to
enter various settings for the ventila-
tion unit.
An overview of the available P menus
is given below:
Menu Options
P1 Reading statuses
(from Menu P2)
P2 Setting time delays
P3 Setting ventilation settings
P4 Reading the temperatures
P5 Setting additional
programmes
P7 Reading and resetting mal-
functions (and system infor-
mation)
P8 Setting 0-10V ports
P9 Reading statuses
(from Menu P5)
Open Comm Power Relay Relay Temp.
Sens
Therm RS 485 12Vdc 1 2
* * A B - + * * * * CC Luxe
Temperature sensor
Jumpers Left: Temp. Senso
Jumpers Right: Relay 2