10
ventilation and/or cooling system for long periods.
2.3.2 ComfoControl fi lter warning
If the ventilation system’s fi lters require replacement (or
cleaning), then the “FILTERS – REPLACE FILTERS” warn-
ing appears on the ComfoControl display.
To replace (or clean) any fi lters, please refer to
your ventilation system’s user manual.
Once the ventilation system’s fi lters have been replaced
(or cleaned), then follow the steps below to delete the fi lter
warning from the ComfoControl display:
•
Press
“
” to go to “SYSTEM STATUS”.
•
Press
“
” to delete the “F
ILTERS
– R
EPLACE
F
IL
-
TERS
” warning.
2.3.3 Information about ComfoControl status
In the absence of error message, you will see:
• “CHECK: OK” on the ComfoControl display.
Information on the status of your ventilation and/or cool-
ing system can then be accessed. This goes as follows:
•
Press
“
” to go to “SYSTEM STATUS”.
The “SYSTEM STATUS” screen displays all the system
data on the ComfoControl.
•
Press
“
” to return to the main screen.
2.4
End of useful life
Consult your supplier as to what you should do with the
ComfoControl at the end of its useful life. If the Comfo-
Control cannot be returned to the supplier, avoid dis-
posing of it with the industrial waste, and ask your local
council about the options for recycling the components
or processing the materials in an environmentally friendly
manner.
3 For the Fitter
This chapter describes how to fi t the ComfoControl.
3.1
Installation conditions
In order to determine whether the ComfoControl can be
installed in a certain area, the following aspects must be
taken into account:
• The ComfoControl must be mounted 1.5 metres from
the fl oor.
• The ComfoControl must be fi tted to allow suffi cient air
to circulate. For example, not behind a cupboard, or in
a corner.
• The ComfoControl must not be located close to a heat
source, such as radiators, TVs, lamps, etc. Direct sun-
light must also be avoided.
• The ComfoControl must not be located close to a cold
source, such as cold-water pipes or unheated walls
(due to poorly heated areas on the other side of the
wall), etc.
• The following facilities must be available in the living
area concerned:
– Flush-fi t casing for the ComfoControl.
– 12V DC power supply from the
ventilation system.
– A/B communication cable from the
ventilation system.
3.2. Installing ComfoControl
3.2.1 Transport and unpacking
•
Take
care when transporting and unpacking the Com-
foControl.
Make sure the packing material is disposed of in
an environmentally friendly manner.
3.2.2 Checking the delivery
Contact your supplier immediately in case of damage or
an incomplete delivery. The delivery includes:
• ComfoControl.
• Mounting bracket (fi tted to the bottom of the Comfo-
Control).
• Connectors (fi tted to the rear of the ComfoControl on
the PCB).
• User manual.
English
