Zehnder Rittling ComfoControl Ease, Руководство пользователя

Страница: 15 / 20

14 - EN EN - 15
Values
Time delay
Sub-menu Description Minimum Maximum Factory
reset
P27 Time for the temporary high setting.
■
After pressing and holding (>2 sec.)
, the ComfoAir switches to the
high setting for “x” minutes and
then switches back automatically to
the normal ventilation setting.
If a 3-position switch is operated during
the time delay mode, then the ComfoAir
switches immediately to the selected
ventilation setting.
0 Min. 120 Min. 30 Min.
P29
(Optional)
Note:
Only applicable to installations
with a corded extractor hood
with temperature sensor.
Setting the extractor hood ventilation
levels.
■
When the extractor hood is switched
on, its ventilation levels can be set
x % higher than the corresponding
“normal” ventilation levels.
1% 99% 10%
Menu P9
➝
Status of programmes
(from menus P5 and P6 additional programmes)
Status
Sub-menu Description Activated
P90 Open fire programme active? Yes (1) / No (0)
P91 Bypass Open Yes (1) / No (0)
P92 Geothermal heat exchanger valve (EWT) Open Yes (1) / No (0)
P93 Post-heater on? Yes (1) / No (0)
P94 Analogue ports (0-10V) active? Yes (1) / No (0)
P95 Frost protection or frost-free element active? Yes (1) / No (0)
P96 Extractor hood programme on? Yes (1) / No (0)
P97 Enthalpy programme active? Yes (1) / No (0)