Zehnder Rittling ComfoAir 350, Инструкция по эксплуатации

Страница: 22 / 40

3
18 System functions
Additional programme values
Submenu Description Minimum Maximum Default
P56 Setting the required
air volume in the house.
• nL: ”normal air volume”.
• HL: "high air volume". nL HL HL
Note:
Setting the air volume in P56 (to “nL” or “HL”) is the starting point for programming
the air specifi cations and setting the fans.
P57 Setting the ComfoAir type.
• Li = ”Left-hand version”.
• Re = ”Right-hand version”. Li Re Li
Note:
The ComfoAir is correctly preprogrammed at the factory.
•
See also the identifi cation plate for these details.
P58 Enter controller priorities.
• 0; Preference to highest air setting
INCLUDING analogue input
• 1; Preference to highest air setting
EXCLUDING analogue input 0 1 0
P59 Confi rming the presence of an en-
thalpy exchanger.
• 0; Enthalpy exchanger fi tted
• 1; Enthalpy exchanger with RH
sensor.
• 2; Enthalpy exchanger without RH
sensor. 0 (= No) 2 (= Yes) 0
Note:
If an enthalpy exchanger without a sensor is selected, then the enthalpy pro-
gramme will not be activated and malfunction alerts EA1 & EA2 will never occur.
Menu P6
Š
Setting additional programmes
Additional programme values
Submenu Description Minimum Maximum Default
P60 n/a 0 (= No) 3 (= Yes) 0
Note:
Always keep this setting on Default
Menu P7
Š
Reading malfunctions (and system information)
(Malfunction) information values
Submenu Description Minimum Maximum Default
P70 Current software version. Version number of the software (without “v”)
P71 Most recent malfunction. Code in accordance with alarm and malfunc-
tion alert
P72 Malfunction before the most recent
one Code in accordance with alarm and malfunc-
tion alert
P73 Malfunction before the most recent
two Code in accordance with alarm and malfunc-
tion alert
P74 Resetting a malfunction in the Com-
foAir 0 1 0