background image

EN - 20 

                

EA2

No communication 

between the 

enthalpy sensor and 

the ComfoAir

Disconnect the power

from the ComfoAir. 

Remove the 2

screws from the 

ComfoAir top box. 

Remove the cover
from the top box. 

Are the

connections

at the

ComfoAir

correct?

Reconnect the

enthalpy sensor. 

Yes

                

EA2 

Malfunction

Set P59 at "0".

Reset the malfunction

(P74 on 1)

Is

P59 set to  
the correct

value?  

Yes

No

Set P59 to the correct

value. 

Reset the unit

(P74 on 1)

Install all parts in

reverse order. 

Reconnect the

power to the

 ComfoAir. 

No

Reconnect the power

to the ComfoAir. 

Is there

12VDC present 

on the 

Luxeconnection

panel?  

Yes

Disconnect the power

from the ComfoAir. 

Replace the 

Luxe 

connection panel

Are the

    fuses on the 

Luxe connection 

panel  

correct? 

Yes

No

Replace the

defective 

fuse

Install all parts in

reverse order. 

Reconnect the

power to the 

ComfoAir. 

No

Replace the 

Luxe 

connection panel

Disconnect the power

from the ComfoAir. 

               

F

ILTER 

E

  

External

 Filter is dirty

Press “

” on the CC 

Ease panel for at least 4 
seconds until the filter 

warning disappears.

Clean or replace the 

External filter according 

to its own instruction.

                ,Fil' ,tEr'  

Internal Filter is dirty

Press “OK” on the 
display for at least 4 
seconds until the filter 
warning disappears.

Disconnect the power 
from the ComfoAir.

Remove the handles 
from the ComfoAir.

Remove the dirty filters 
from the ComfoAir.

Slide the clean (new) 
filters back into the 
ComfoAir. 
Cleaning: Vacuum the 
filters with a vacuum 
cleaner.

Refit the handles to the 
ComfoAir.

Reconnect the power to 
the ComfoAir.

                

F

ILTER 

I

  

Internal Filter is dirty

Press “

” on the CC 

Ease panel for at least 4 
seconds until the filter 
warning disappears.

Disconnect the power 
from the ComfoAir.

Remove the handles 
from the ComfoAir.

Remove the dirty filters 
from the ComfoAir.

Slide the clean (new) 
filters back into the 
ComfoAir. 
Cleaning: Vacuum the 
filters with a vacuum 
cleaner.

Refit the handles to the 
ComfoAir.

Reconnect the power to 
the ComfoAir.

Содержание ComfoAir 350 Basic Series

































Отзывы: