Zehnder Pumpen MICROBOY, Руководство по эксплуатации

Страница: 5 / 14

5
1.4 Accessory
This unit is ready for plug-in,complete with pressure connection,check-valve and all necessary seals.
2. Safety
These instructions for use contain general information, which should be noted when setting up, using and serving
the equipment.
2.1 Marking of information in the instruction for use
danger symbol in accordance with DIN 4844 - W9,
for warnings regarding electrical current the following symbol is used
danger symbol in accordance with DIN 4844 - W8
Instructions which must be complied with if damage to the equipment and malfunctioning is to be avoided are
indicated by the presence of the words
-
Attention! or Important! -
2.2 Dangerous arising due to non-compliance with safety advice
Ignoring of security instructions can lead to danger of personnel and to the environment as well as causing
possible damage to the equipment. Non-compliance with security instructions can lead to the loss of right to
claim damages.
Non-compliance with security instructions can lead for example to:
- Breakdown in important functions of the equipment
- Breakdown in prescript methods for maintenance and upkeep
- Danger of injury from electrical, mechanical or chemical sources
- Environmental damage resulting from leaks of environmentally dangerous substances
2.3 Safety concious work
These safety instructions, as well as all national safety requirements and extra internal company precautions or
such laid down by the owner of the euipment must be observed.
2.4 Safety information for the owner / operator
- Any parts of the machine which could de a possible source of hot or cold burns should be covered.
Covering for moving parts (e.g. couplings) should not be removed while the machine is in use.
Leak out of dangerous substances (e.g. explosives, poisons, hot liquids) have to be handled in such a way
that no danger to persons or the environment may occur. Legal requirements must be observed.
- Danger resulting from electrical current must be prevented (For more information consult the
specifications of the VDE or your local electricity board).
2.5 Safety information for maintenance, inspection and fitting
The owner must ensure that all maintenance, inspection and fitting work is carried out by qualified and authorised
personel who are familiar with the operating instructions for equipment. In general all maintenance work must be
carried out while the equipment is not in operation. The instructions for turning off the equipment contained in
these operating instructions must be observed.
Pumps and units which carry hazardous materials must be decontaminated.