ZEGGO WLX_BTZ1
REV. 1, 03/19
5
During start up, the device sent out a signal every 6 second and there is a total of 6 start up
transmission cycle. It is useful to check the transmission status during starting period (about 36
seconds) before device going into normal operation which has longer transmission interval. Start up
operation can trigger repeatedly every turning on device from off state.
Mounting
Avoid placing the device close to a metal object that may affect the transmission range. Depends on
installation location, devices can be installed by using
screw with plastic wall plug number of 6 on
both flange of the enclosure
. For surface mounting, surface shall be cleaned to ensure free of grease,
water and dust.
Sensor Connection
Connect only Water Leakage Detector Probe to the device. Connection points refer to P1 and P2
(non- polarity) in the diagram below.
P2
P1
N/A
N/A
