ZEEWEII DSO1511G, Руководство пользователя

Страница: 12 / 16

12
Click the "Menu" button to return to the oscilloscope window.
6.12 Generator
Long press the “Run/Stop” button to open the window of the signal generator,
The signal amplitude is 2.5V, the maximum frequency of the sine wave is 2MHz, and
the other waves are 2MHz.
Click the "Run/Stop" button to turn on/off the signal generator output.
Click the "50%/Power" button to reset the number to: 1.00Khz, 50%
Click the "mV" and "V" keys to switch the output waveform: sine wave, square
wave, triangle wave, etc.
Click "Ok" to confirm and exit.
Square wave and triangle wave can adjust the duty cycle, other waveforms do
not work.
Note: When the set frequency is greater than 1MHz, the square wave signal may
show small horizontal jitter.
6.13 Video output
The 3.5mm headphone jack at the bottom can
output
AV analog video signal ,
which can be connected to a TV or projector. Open Menu -> Set, and then long press
"Run/Stop" to enable video output. Disable if executed again.
6.14 Connect to PC
The screenshot pictures can be exported to a computer via a USB connection.
Operation method: Click "Menu" button to open the menu, switch to the "Set"
menu, and then long press the "ns" button. At this time, connect the computer through
the USB cable, and the computer will appear a U disk, which stores the user-stored
waveform pictures.
If you want to return to the oscilloscope window, you need to disconnect the
USB, and then restart the machine .
Warning :
This U disk is only for exporting pictures, please do not copy other files from the
computer to the U disk.