- 3 -
Solenoid Output
- solenoid output settings (power jet 2, or duty solenoid)
TPS
- enable, or disable TPS
TPS close [0%]
- calibrating TPS close position
TPS open [100%]
- calibrating TPS open position
TCT mode
- reduced spark at high revs with closed throttle
Ign. Map SW
- activating/deactivating external switch for selecting ignition map
Pulses Per Rev
- number pulses per revolution from pickup
Exit
2.2.
SET PV PARAMETERS SUBMENU
Load PV Curve
- load (select) PV curve (from #1 to #5)
Save PV Curve
- save new PV curve (from #1 to #5)
Set PV Curve
- PV curve parameters submenu
Dev-
- deviation of PV position
Close Position
- max close PV position
Open Position
- max open PV position
PV Test
- PV position test
Power-up Test
- enable, or disable test cycle at power-up
PV Curve SW
- activating/deactivating external switch for selecting PV curve
Exit
3.
LOAD IGN. MAP
Enter
Set Ign.
menu and move to
Load Ign. Map
with pressing + or - and then press enter .
Now you can select number of saved ignition map, with pressing + or - and then press enter .
4.
SAVE IGN. MAP
Enter
Set Ign.
menu and move to
Save Ign. Map
with pressing + or - and then press enter .
Now you can select number to which you want to save your ignition map, with pressing + or -
and then press enter .
5.
SET IGNITION MAP
(if TPS disabled)
Enter
Set Ign.
menu and move to
Set Ignition Map
with pressing + or - and then press enter.
...you entered submenu for setting ignition map.
Submenu organisation:
Nr. of Points
- number of ignition curve points (from 4 to 12)
1)
- first ignition curve point
2)
- second ignition curve point
...
...
...
...
Exit
- exit submenu
