- 13 -
28. PV
Test
PV test can be used for testing or measuring valve position. Valve can be moved to any position
from 0% to 100%, without engine running.
Enter
Set PV
menu and move to
PV Test
with pressing + or - and then press enter .
Now you can set valve position with pressing + or - and then press enter .
29.
POWER-UP Test
Enabling or disabling test cycle of PV servo at power-up.
Enter
Set PV
menu and move to
Power-up Test
with pressing + or - and then press enter .
Now you can enable or disable power-up test with pressing + or - and then press enter .
30.
PV CURVE SW
Enabling, or disabling PV curve switch for changing PV curves while riding.
Enter
Set PV
menu and move to
PV Curve SW
with pressing + or - and then press enter .
Now you can enable, or disable
PV Curve
switch with pressing + or - and then press enter .
31.
MECHANICAL SETTINGS (Static Angle)
Static Angle
is ignition advance angle, set with stator (generator).
Measure this angle with dial gauge. This measured
Static Angle
is your maximum advance
angle you can set with
PDCI
.
Calculating mm to deg or vice versa:
