3
2.1.
SET IGNITION PARAMETERS SUBMENU
Load Ign. Map
- load previously saved ignition curve (from #1 to #2)
Save Ign. Map
- save new ignition curve (from #1 to #2)
Ignition Map
- ignition curve parameters submenu
Advance
- advance/retard whole ignition curve
Gear Shift Light
- shift light
Quick Shift
- quick shift parameters
Rev Limit
- rev limit
Static Angle
- static angle (pickup position)
Compensation
- signal delay compensation (from pickup to spark plug)
Power Jet 1
- power jet 1
Solenoid Output
- solenoid parameters
TPS
- enable, or disable TPS
TPS close [0%]
- calibrating TPS close position
TPS open [100%]
- calibrating TPS open position
TCT mode
- reduced spark at high revs with closed throttle
Ign. Map SW
- activating/deactivating external switch for selecting ignition map
Pulses Per Rev
- number of pulses per revolution from pickup
Stop SW Mode
- stop switch mode
Trigger Mode
- trigger mode
Kickback Protection
- kickback protection settings
IgnitionTest
- test ignition spark
Exit
2.2.
SET PV PARAMETERS SUBMENU
Load PV Curve
- load previously saved curve (from #1 to #5)
Save PV Curve
- save new curve (from #1 to #5)
Set PV Curve
- valve curve parameters submenu
Dev-
- deviation of valve position
Close Position
- max close valve position
Open Position
- max open valve position
PV Test
- valve position test
Power-up Test
- enable, or disable test cycle at power-up
PV Curve SW
- activating/deactivating external switch for selecting PV curve
Exit
3.
LOAD IGN. MAP
Enter
Set Ign.
menu and move to
Load Ign. Map
with pressing + , or - and then press ENTER .
Select number of previously saved ignition map, with pressing + , or - and then press ENTER .
