Zeegma Zonder Pro Multi, Руководство пользователя

Страница: 13 / 104

EN
LIST OF PARTS (fig. A, B)
1. Adjustable airflow handle
2. Flexible hose
3. Transport handle
4. Upper body
5. Metal clamps
6. Stainless steel tank
7. Drainage hole
8. Wheels
9. Chrome-plated telescopic
tube
10. On/off switch
11. Top lid
12. Inlet hole
13. Removable base
14. Universal cap
15. Sponge filter
16. HEPA filter
17. Bag for dry vacuuming
18. Heat-resistant filter
19. Round bristle nozzle
20. Crevice nozzle
21. Carpet and rug cleaning
nozzle
22. Upholstery cleaning nozzle
23. Flexible heat-resistant hose
24. Metal crevice nozzle
25. Filter support
26. Outlet hole
MOUNTING
1. Insert a flexible hose into the inlet hole (fig. 1). Make sure it
is tightly fixed. To remove the flexible hose, press the release
button, then twist and pull (fig. 2).
2. Attach the telescopic tube (fig. 3) and the selected nozzle
(fig. 4) to the hose.
USE
1. To use the vacuum cleaner in the blowing function, insert
the flexible hose into the outlet hole (fig. 6).
2. To use the vacuum cleaner to clean dust, dirt and other dry
debris, place the HEPA filter on the filter support (fig. 8) and
then place the bag inside the vacuum cleaner at the mouth
of the inlet hole (fig. 9).
3. To use the vacuum cleaner to clean ash, insert the heat-resistant
filter (18, fig. A) into the device tank (6, fig. A) and then place the
HEPA filter on the filter support (fig. 8). Attach the metal crevice
nozzle (24, fig. B) to the heat-resistant hose (23, fig. B). Note!
Only use a heat-resistant hose with a metal crevice nozzle to
clean the ash. Make sure the inside of the hose is metal.
4. Secure the top lid by closing the metal clamps (5, fig. A).
Element A should be lifted upwards and element B should
be lifted downwards (fig. 5).