12
MONTAGGIO
MIRTOON
AVVOLGIMENTO E SVOLGIMENTO
CORRETTO
→ Per svolgere il tubo, afferrarlo ferma-
mente per la sfera di arresto e allonta-
narsi camminando dall'avvolgitubo (sfe-
ra di arresto = la sfera montata poco
prima della fine del tubo per evitare
che esso venga avvolto completamente
nell'avvolgitubo)
→ Quando il tubo ha la lunghezza deside-
rata, fermarsi e il meccanismo frenan-
te¬ ne assicura il blocco automatico.
Se questo non avviene subito, tirare
lentamente il tubo fino all'azionamento
del blocco automatico.
→ Se serve una lunghezza superiore,
allontanarsi ulteriormente dall'avvolgi-
tubo. Ripetere la procedura di blocco
automatico.
→ Affinché l'avvolgitubo possa riavvol-
gere il tubo, afferrarlo fermamente
per la sfera di arresto e allontanare
delicatamente il tubo dall'avvolgitubo.
Accompagnare il tubo finché è avvolto
nell'avvolgitubo. Non lasciare mai il tubo
durante avvolgimento automatico.
ATTENZIONE!
→ Leggere attentamente il manuale prima
di utilizzare l'avvolgitubo.
→ Per evitare l'indurimento del tubo, l'av-
volgitubo deve essere riposto all'interno
in caso di temperatura minore o uguale
a -5°C. Per prevenire i danni provocati
dal gelo, l'avvolgicavo va riposto all'in-
terno d'inverno.
→ A temperature inferiori allo zero, svuo-
tare il tubo e riporre all'interno la pistola
a spruzzo e l'ugello diritto. Il ghiaccio fa
aumentare il volume e, quindi, fa scop-
piare i componenti rigidi di plastica.
→ Non è permesso smontare né aprire di
persona l'avvolgitubo: questo risulta
pericoloso a causa della molla tesa nel
meccanismo.
→ Il tubo e l'avvolgitubo sono
destinati esclusivamente all'impiego con
acqua.
→ L'avvolgitubo è costituito da plastica,
quindi non deve essere fatto cadere né
essere accatastato sotto ad altri oggetti,
altrimenti può rompersi o frantumarsi.
→ Dopo l'uso, chiudere sempre l'acqua.
→ La corretta conservazione del tubo è
importante per un avvolgimento ottima-
le: se è sporco, pulirlo con un detergen-
te neutro.
→ Non lasciare mai il tubo durante avvolgi-
mento automatico.
SE IL TUBO NON SI AVVOLGE PIÙ
COME SI DEVE, CONTROLLARE I
SEGUENTI PUNTI.
→ Problema: Si avvolge male.
→ Causa: Un tubo sporco, appiccicoso
si ammassa e, quindi, si blocca contro
l'avvolgitubo.
→ Soluzione: Pulire il tubo con un deter-
gente neutro e trattarlo eventualmente
con un po' di olio lubrificante.
→ Causa: Il tubo si ammassa a causa di un
avvolgimento troppo veloce.
→ Soluzione: Svolgere il tubo e riavvolger-
lo gradualmente.
→ Problema: In generale, il tubo non si
riavvolge più.
→ Causa: La molla è rotta.
→ Soluzione: Contattare il rivenditore
oppure ZEE – www.zee.be