42
GA90 Modular Gateway User’s Manual
6.7.4
DSP
•
Tone Zone:
ring character of local country or area (different countries and areas have various
ring with different frequency, duration and interval). Our device supports up to 36 countries and
areas' solutions for your choice.
6.7.5
FXO
•
CID TYPE:
coming call display type of FXO line: FSK, ETSI DTMF, India DTMF, Brazil DTMF.
You need to ensure the both
CID TYPE
are the same mode when GA90 's FXO connects to
the peer. The receiving of CID caller number will be affected if not.
6.7.6
FXS
You may set FXS line register-type or unregister-type. If it's register-type, you should set IP
address and port for proxy and register proxy, plus register expiration, IP address and port of
outbound proxy, Home Domain, and maximal call number etc.
Note:
If it's register type FXS line, you do not need to set call routing for it. If it's register-type,
you should set
User name
and
Password
for that enabled FXS line in
Line Settings >
FXSLine
.
•
Proxy:
IP address and port of proxy.
•
Registrar Server: IP address and port of Registrar Server.
•
Register Expiration: maximal timeout value, count in second.
•
NAT Traversal Mode: three ways:
- None:
no forwarding.
- Port
Forwarding:
port forwarding mode:
*
Pubilc Address:
set public IP address or domain and port, the IP and port are
separated by ":".
- Outbound
Proxy:
the IP address and port of the Outbound proxy which is typically used
in an environment with a firewall/NAT for signals and media stream traverse firewall/NAT.
*
Outbound Proxy:
set IP address or domain and port for outbound proxy, the IP and
port are separated by ":".
Note:
The default port is 5060 if you set only IP address for
Outbound Proxy
.
•
Home Domain:
domain's IP address.