5. Line Settings
21
•
Phone Number:
the phone number of this line.
•
Username :
the user name for register.
•
Password:
the password for register.
•
Register Expiration:
timeout after these seconds.
•
Home Domain:
domain's IP address.
•
NAT Traversal Mode:
three modes:
- None:
no mode.
- Port
Forwarding:
port forwarding mode:
*
Pubilc Address:
set public IP address or domain and port, the IP and port are
separated by ":".
- Outbound:
the IP address and port of the Outbound proxy which is typically used in an
environment with a firewall/NAT for signals and media stream traverse firewall/NAT.
*
Outbound Proxy:
set IP address or domain and port for outbound proxy, the IP and
port are separated by ":".
Note:
The default port is 5060 if you set only IP address.
•
Max Connections:
maximal simultaneous call number supported.
•
Enable AA:
if enter AA (Auto Attendant) when dial in via this line.
5.1.2.2
Unregister IP Line
Set these paramters when
Register
is"Disable":
•
Proxy:
the same as 5.1.2.1 Register IP Line
•
Phone Number:
the same as 5.1.2.1 Register IP Line
•
Username:
the same as 5.1.2.1 Register IP Line
•
Passward:
the same as 5.1.2.1 Register IP Line
•
Ping Interval:
for Unregister IP Line, you may set
Ping Interval
to let system Ping it
periodically for its status. When the value is 0, the system does not Ping it and think it available
for ever.
•
NAT Traversal Mode:
the same as 5.1.2.1 Register IP Line
•
Max Connections:
the same as 5.1.2.1 Register IP Line
•
Enable AA:
the same as 5.1.2.1 Register IP Line
Note:
If there is no callerID when call out via unregister IP Line, the default Caller ID is 1111.