Zecre PH810W, Инструкция по эксплуатации

Страница: 40 / 210

8.TROUBLESHOOTING/ FAQ
34
English
4.Didn't capture the photos of the target moving
subject that you are interested in?
It might cause because of the following reasons: the camera
is placed at an environment where there is motion associated
with tree branches generating motion or an area where there is
high heat in the foreground and any motion from wind. Setting a
camera up over water is also a potential cause for this issue.
To remedy this situation:
(1)Try moving the camera to an area that does not have any of
these issues.
(2)If the camera continues to take images of no subject
interesting,try placing the camera in an inside environment and
aiming at a location where there is no motion.
(3) If the camera continues to show issues, please contact our
customer service.
5.Battery life is shorter than what expected?
(1)Battery life will vary with operating temperature and the
number of images taken over time. Typically, the camera will be
able to capture several thousand images before the batteries
die. (Note: When the battery power is low, the camera will
automatically enter TL video mode to retain as much power as
possible for the camera to work normally.)
(2)Check to make sure you have used new alkaline batteries.
(3)Make sure that the power switch was turned to the ON
position and not in the TEST modes.
6.The camera can't take images?
(1)Please make sure that the SD card is not full. If the endless
capture is not set and the memory card gets full, the camera will
stop taking images.