zebris Medical GmbH
FDM Technical Data and Operating Instructions
Page 26/36
Synchronization output (SYNC-OUT)
If a third party device is connected to the synchronization output SYNC-OUT then
depending on the setting of the configuration window from the application software will
trigger a synchronized measurement of the third party device either via start/stop or “frame
by frame” mode.
Built-in LEMO
– Jack at Front of ZEBRIS Gauge
Series „00“, 4-pin , fitting Nut 0°
LEMO- Part. No. EPG.00.304.NLN
Respective Plug:
Type of plug for SYNC-IN: LEMO- Part. No. FGG.00 304.CLADxxxx
Pin assignment:
Pin 1
+5 V
Pin 2
GND
Pin 3
Active_Out
Pin 4
Clk_Out
Electrical specifications:
Type of plug for SYNC-OUT
LEMO- Part No. FGG.00 304.CLADxxxx
Output resistance
100
High-Level
>= 2.0 V
Low-Level
<= 0.8 V
View
Front side
View
Solder side
Fitting Nut: 0°
Fitting Nut: 0°
