6
REPLACE ORIGINAL REMOTE OR ADD ADDITIONAL
REMOTE
1. Press the
SETTING
button on the motor until the shading
jogs once. Release the button immediately after the first jog -
this should be not more than 3 seconds.
2. Repeat this step for all shadings that will be controlled by a
single channel.
3. Select the channel that you want to program using the
CHANNEL
selector buttons.
4. Press and hold the
CONFIRM
button until the shading(s)
jogs once.
5. Repeat steps 1-4 to program the rest of the channels on a
multi-channel remote.
6. To set the All function on the multi-channel remote, activate
the setting buttons (step 1) on all shadings. Press the Channel
button until all 5 indicator lights are lit. Then press confirm.
ADVANCED PROGRAMMING
REMOVE A SHADING FROM A REMOTE OR CHANNEL
AND LINK IT TO A DIFFERENT REMOTE OR CHANNEL
Unlink the motor from the remote
- Note: this step also
erases the lower and upper limits.
1. Remove the shading from the window. Press and hold the
SETTING
until it completes one jog/jog jog cycle.
2. Release the
SETTING
button. The original remote or
channels have been unlinked.
Link the motor to the new remote or channel
1. Follow the steps for replacing the remote above.
2. Set the lower and upper limits by following the instructions
on page 5.
P
Setting
(red button)
C
L
Confirm
Limit
1
2
3
4
5
Up
Stop
C
Channel
Indicator
Lights
Down
Channel -
