Zebex Z-6181, Руководство пользователя

Страница: 25 / 44

Dual-Laser Omnidirectional In-Counter Scanner 19
U
SER
’
S
M
ANUAL
held Scanner Connection Auxiliary Hand
Auxiliary Port
The scanner provides an auxiliary port for the use of an additional peripheral device to
be connected to the host system via the scanner itself. It is usually used to connect a
handheld scanner for items too large to place on the checkstand.
The auxiliary port will support 5VDC devices with a 300mA maximum current. If the
auxiliary device exceeds this specification, an external power supply will be required to
power the auxiliary device.
Cable pin-out information for the auxiliary port is as following:
Pin Function
1 Reserved (for factory use)
2 N.C.
3
+5V output, 300mA max.
4 RTS
5 Ground
6 TX
7 RX
8 NC
9 CTS
10 Reserved (for factory use)
Handheld Data Format Requirements
Before installation, the connected handheld scanner must be configured to transmit data
format as below.
Baud rate 9600
Data bit 8
Parity None
Stop bit
1
Handshaking RTS/CTS
Message terminator
STX/ETX
Cod 9 identifier code e 3 M
ITF 2 of 5 ide ntifier code I
C ost c tifier hinese p ode iden code H
UPC-A identifier code A
UPC-E identifier code E