Wetif DT 392, Руководство по эксплуатации

Страница: 1 / 8

WebDT Mobile Tablet Barcode Scanner Operation Guide
Mobile s Tablet
Barcode Scanner
Button Management
The default scanner trigger button is at right side. To
assign Scanner Trigger button, follow the procedures
below.
1. Start
Button Manager by clicking on in the
system tray.
2. Select an available unused button marked with the
icon .
3. Click on to go to the second screen of Button Manager.
4. Click on the icon to assign the Scanner Trigger to the unused button.
5. Click
OK
to apply configuration settings and close the window.
Installation
The Barcode Scanner is preinstalled as an option for DT 39 2 .
DT 39 2 OPERATION GUIDE
Scanner 1/2
Barcode Scanner
Trigger Button
Scanner Configuration
To Add/Remove Symbologies, follow the procedures below.
1. Click Start | All Programs | DT Research | Button
Manager | ScannerConfig .
2. Select
COM3
and click
Connect
button.
3.
Add
Symbology with button and
Remove
Symbology with button.
4. Select the Beep after scanning barcode checkbox to
enable beep sound after scanning bar code or deselect
it to disable the beep sound.
5. Click OK to apply the configuration settings and close
the window.
Note: Adding only the symbologies you need for testing will give the best results. Adding too many
symbologies all at the same time will influence performance.