Zebex Z-6070 Series, Руководство пользователя, Страница: 14 / 29

Dual-Laser Omnidirectional Scanner 7
U
SER
’
S
M
ANUAL
Connecting the Scanner
The scanner connects to a host POS terminal via a power link interface cable. The cable
connects to the scanner with a modular connector and to the host terminal with the connector
required by the host.
The scanner supports four types of interface.
1. RS-232C interface
Standard RS-232 connection to a host, proper communication between the scanner and the
host is set up by scanning barcode menus.
1.)
Make sure that the power of your computer system is switched off.
2.) Plug the interface cable into the scanner port until a firm “Click” sound is heard.
3.) Connect the other connector of the interface cable into the appropriate port of your
POS or terminal.
4.) Use a power +5V DC external power supply to the power jack on the interface cable, if the
RS-232C port of computer system does not supply power.
5.) Switch on your computer system.
6.) Adjust the scanner’s parameters if necessary, by scanning the appropriate labels in
programming guide.
Serial RS-232 port of
PC or POS terminal
Figure 6
2.
Keyboard Wedge
When configured for Keyboard Emulation input, the host accepts input from the scanner as
keystrokes. The scanner can perform Keyboard Emulation input using a keyboard interface cable
and a male to female connecting cable.
1.)
Make sure that the power of your computer system is switched off.
2.) Plug the interface cable modular into the scanner port until a firm “click” sound is heard.
3.) Connect the male end of the keyboard cable into the female end of the interface cable.
4.) Connect the female end of male-to-female connecting cable into the male end of the
interface cable.
5.) Connect the male end of male-to-female connecting cable into the keyboard port on the
host