U
SER
’
S
M
ANUAL
Handy Wireless Scanner
19
Start Of Configuration
Wireless Mode
The scanner connects to the host via wireless connection. You may select SPP Master or
SPP Slave for PC connection or select HID mode and Smart phone mode for smart phone
connection.
SPP Slave Mode
In this mode, the scanner connects to the host /PC via wireless connection and performs
like there’s a serial connection. In SPP Slave mode, the scanner is discoverable from a
remote device and it can request the scanner for connection. There are several ways to
connect the wireless scanner to your PC. If you have your own applications please check
their User’s Manuals for pairing instructions.
To connect a wireless device to Window based system for the first time:
1.
Turn on the host computer and activate its wireless connection.
2.
Select “Add Bluetooth device”. Or open the dialog Bluetooth devices and click
“Add”.
3.
Power on the scanner and program it with “SPP Slave mode” label.
Scanner SPP Slave enable
Enable wireless SPP Slave mode.
4.
On Devices tab, click Add. This will open the Add Bluetooth Device Wizard.
5.
Select the "My device is set up and ready to be found" checkbox, and then
click Next.
6.
The scanner should be on the list of discoverable devices. The default name
of the scanner is “Z-325X BT” with address. Select the device and click “Next”.
7.
Select “Let me choose my own passkey” and enter the pin code. The default
pin code is “12345678.
8.
Click “Next” to connect the scanner to the host. A short beep should be
heard upon connection.
End Of Configuration