U
SER
’
S
M
ANUAL
Wireless Handheld Gun Type 2D Image Reader
54
Start Of Configuration
4.
Wand Emulation Setting
Wand emulation is not supported as standard, if needed, please contact your distributor.
(Code128, Code93 not supported)
Wand Emulation
All barcode will be decoded and transmitted in that
symbology
Enable Wand output data format as CODE39
Wand emulation data output black=high
y
Scan this bar code to set quiet zones and
spaces low and bars =high
Wand emulation data output black=low
y
Scan this bar code to set quiet zones and
spaces high and bars=low
Idle = high
y
Idle state refers to the TTL logic level of the
Wand Emulation signal when not in use
Idle = low
y
Idle state refers to the TTL logic level of the
Wand Emulation signal when not in use
End Of Configuration