Zebex Barcode scanner, Краткое справочное руководство

Страница: 5 / 37

4
Power Supply

Use only original factory battery and the charging equipments.

Using any other type of battery and charging equipment may damage the scanner
and invalidate the warranty.

Do not short the battery terminals. The battery could overheat.

Do not attempt to split or peel the outer casing.

Remove the battery if the scanner is not going to be used for a long time. If the
battery is left unused for more than 3 months, you need to charge the battery
before use.
Wireless Communication

Wireless technology operates 100M / 75M with communication cradle.
Maximum communication range may vary depending on obstacles
(person, metal, wall, etc.) or electromagnetic environment.

The following conditions may affect the sensitivity of wireless
communication.

There is an obstacle such as a person, metal, or wall between
this unit and wireless device.

A device using 2.4 GHz frequency, such as a wireless LAN device,
cordless telephone, or microwave oven, is in use near this unit.

Because wireless devices and wireless LAN (IEEE802.11b/g) use the
same frequency, microwave interference may occur and resulting in
communication speed deterioration, noise, or invalid connection if this
unit is used near a wireless LAN device. In such a case, perform the
following.

Use this unit at least 10 m (about 30 ft) away from the wireless
LAN device.

If this unit is used within 10 m (about 30 ft) of a wireless LAN
device, turn off the wireless LAN device.

Install this unit and wireless device as near to each other as
possible.

Microwaves emitting from a wireless device may affect the operation of
electronic medical devices. Turn off this unit and other wireless devices
in the following locations, as it may cause an accident.

Where inflammable gas is present, in a hospital, train, airplane,
or a petrol station