Zeagle Tiger performance T-310SSL, Руководство пользователя

Страница: 8 / 21

6
During storage, when the valve hand wheel (Fig. 2) is turned off (clockwise),
tank pressure is applied to the backside of the safety relief burst disc, but not
the HP (high pressure) gauge port or the regulator section of the SBA. When
breathing air is needed or a reading of tank pressure using the HP gauge is
required, the valve hand wheel is turned in a counter-clockwise direction until
it’s fully open. This allows the air to move from the lower valve section of the
SBA into the upper pressure regulating section and out the LP (low pressure)
ports. This also allows air to get from the cylinder to the pressure gauge in the
HP port. After use, the valve hand wheel should be closed by turning it fully
clockwise.
Tiger Performance SBA (continued)
Fig. 2