background image

OCTOPUS (Alternate Second Stage) USE

The diver controls available on the Zeagle standard 
Envoy second stage make it an excellent choice for 
Octopus use.   An Octopus Regulator is often subjected 
to conditions that may cause a free-flow.  For example, 
jumping into the water or swimming in a strong current.  
To minimize this, move the Dive / Pre-Dive Lever forward 
to the “-” Minus position. When the Octopus Regulator is 
needed for delivering air to a diver, the Dive / Pre-Dive 
Lever is moved back to the DIVE  “+” Positive position.   
Although breathing resistance will be somewhat greater, 
the regulator will still deliver ample air on demand if the 
lever is accidentally left in the Pre-Dive position.  Longer 
hoses are available from Zeagle for Octopus use.

10

NOTE: Ask your authorized Zeagle Scuba dealer for 
in-store instructions and training on the use of the Dive 
/ Pre-dive Venturi Lever. Your dealer will show you 
how to make adjustments to get the desired breath-
ing results. To actually experience the effects of the 
adjustment range, the instruction should be conducted 
with the diver breathing through a regulator attached 
to a full air supply. The feel of the regulator breathing 
underwater is of course somewhat different from the 
feel of breathing above the surface.

Содержание ReZort 310-5210




















Отзывы: