Zeagle Octo-Z, Руководство пользователя

Страница: 8 / 19

6
WARNING
1. Like all connections on your Scuba set-up, the
connection between the corrugated hose and the
Octo-Z should be checked for tightness before
each dive. The Collar should be tightened using
the fingers, with enough force so that it will
not become accidentaly loosened during the
dive. RECHECK THE COLLAR FOR TIGHTNESS
DURING YOUR EQUIPMENT CHECK AT THE
BEGINNING OF EVERY DIVE!
2. During initial installation, the O-ring on the
Inflator-hose-to-1st-stage-Fitting will seal with
hand-tight pressure, but may come loose during
use if not tightened carefully with a small wrench.
Proper torque for the hose fittings is 40-45 in
lbs. (4.5 - 5 joules) Excessive tightening will not
help the seal and may damage the parts (see
DEMA Guidelines No. 101, Low Pressure Hose
Installation Caution Statement; ANSI American
National Standard for Underwater Safety, para-
graph 9.3.1).