Zeagle Octo-Z, Руководство пользователя

Страница: 15 / 19

13
It is essential that your Octo-Z is checked at least annually by an
authorized Zeagle regulator technician. Unusually heavy use, or use
in dirty or contaminated water may result in the need for more frequent
service. A service record has been provided at the end of this manual
to assist you in keeping your regulator’s service up to date.
MAINTENANCE
Failure to rinse sterilizing chemicals out of the regulator will cause
serious damage to plastic parts of the regulator. This will result in
cracking of hard plastic parts and shrinking or swelling of soft plastic
parts. NOTE: DO NOT USE SOLVENT CHEMICALS TO CLEAN THE
REGULATOR
Store the clean dry regulator in a clean bag or storage box, away from
(OPV) and flow through the inner bladder flushing out salt and miner-
als. Pull both OPV strings occasionally. When the BC is flushed out,
turn the water off and disconnect the garden hose from the coupling.
Excess water can be drained out of the corrugated hose or from the Over
Pressure Valves by pulling the release strings. DO NOT OVER TIGHTEN
THE COUPLING. It is not designed to seal completely against a garden
hose. A LITTLE LEAKAGE IS OK.
The coupling on the corru-
gated hose is designed to
connect to the typical gar-
den hose. After your dive,
LOOSELY attach the connec-
tion to a garden hose (Fig.
5) and turn the fresh water
valve on to a slow controlled
flow. The water will flow into
the bladder of your BC and
when the bladder is full, the
excess water will push open
the Over Pressure Valve
Fig. 5