Zeagle Flathead VI, Руководство пользователя

Страница: 14 / 20

12
• Zeagle BCD’s
• Zeagle Instruments
• Zeagle Alternate Air Sources
• Zeagle Drysuits
• Zeagle Router Block
since this may introduce water into the second stage and the low-pressure
hose. After rinsing, reconnect the regulator to an air supply and thor-
oughly shake or blow all excess water from the second stage and allow
the entire regulator to air dry before storing. For reasons of hygiene, equip-
ment subjected to frequent use in training, rental, etc. should be rinsed in
water containing a suitable soap based sterilizing agent.
NOTE: DO NOT USE SOLVENT CHEMICALS TO CLEAN THE
REGULATOR
3 . Store the clean, dry regulator in a clean bag or storage box, away from
sunlight, excessive heat and humidity.
4 . The Valve Seal in the second stage will give longer service if the
Resistance Control Knob on the second stage is turned fully counter clock-
wise when the regulator is stored longer than a week.
MAINTENANCE
It is essential that your regulator is checked at least annually by an autho-
rized Zeagle regulator technician. Unusually heavy use, or use in dirty or
contaminated water may result in the need for more frequent service. A
service record has been provided at the end of this manual to assist you
in keeping your regulator’s service up to date.
Ask your Zeagle dealer for information on the following products to use
with your Zeagle Regulator, adding to your diving enjoyment and safety.