Zeagle Flathead VI, Руководство пользователя

Страница: 10 / 20

8
The First Stage may be attached to your Scuba cylinder by means of the
standard yoke assembly for cylinders using a “post” type valve (fig. 3) or
the optional DIN 477 connector for cylinders utilizing a DIN valve (fig. 4).
Zeagle offers a DIN to Yoke Converter p/n 330-0001 (fig. 5) that allows
DIN fitted regulators to be converted for use with a “post” type valve in a
few seconds without using tools. Always mount the regulator on the valve
with the clear diaphragm (and black diaphragm trim ring) downwards as
shown in Fig. 3, 4, 5.
DRY ENVIRONMENTAL SEALING
The Zeagle Flathead-VI dry first stage environmental sealing system
does not require packing with messy silicone oil, or grease. This sys-
tems helps keep the main spring / ambient pressure sensing chamber
clean and dry, and works extremely well in cold water conditions.
SECOND STAGE FEATURES
The Zeagle ZX second stage, is pneumatically balanced and is among
the most advanced diver adjustable breathing systems available. No
fixed or “automatic” system can achieve an ideal level of breathing
performance under all conditions. Zeagle ZX second stages are
equipped with separate diver controls for both cracking resistance
and venturi boost, to allow the diver to adjust the complete range of
breathing characteristics. By using a combination of the two controls,
it is possible to tune the regulator to give virtually ideal performance.
Fig. 4
Fig. 5
Fig. 3