ZCS Azzurro HYD 3000 ES, Быстрое руководство по установке

Страница: 22 / 24

By switching on the HYD-ES inverter when there is no grid, it will be able to supply the energy
coming from the PV system and stored in the batteries to the pre-defined critical loads. To do this,
it is necessary to activate the EPS (Emergency Power Supply) mode.
Note : Power supplied in EPS mode** in
the absence of 3000VA photovoltaic
production.
Apparent peak power in the absence of
4000VA photovoltaic production
Check that the DC circuit
breaker of the inverter is in
the OFF position.
1)
2)
Turn on the batteries:
Switch on the photovoltaic system by turning the switch to the ON position.
3)
ON
In case of WeCo batteries, press the POWER button of
each battery for 1 second, the RUN LED will turn on and
the internal contactor will close automatically.
To turn on the
Pylontech batteries:
bring the switch on
the front of
all the
batteries to the ON
position..
Press the red SW button of
a single battery for one
second, the internal
contactor will close
automatically.
20.1 OFF GRID MODE ONLY
20.2 OFF GRID MODE ONLY - START UP
PV panels
HYBRID
Critical Loads
Batteries
** Power output in EPS mode depends on the type of batteries and
the status of the system (e.g. no. of batteries, residual capacity,
temperature)