User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of 27/01/2023 - Application: GID
162/193
6)
Insert the 4G adapter into the appropriate port, making sure to follow the direction of the connection and
ensure correct contact between the two parts. Secure the 4G adapter by tightening the two screws inside
the package.
(a)
(b)
Figure 93
– Inserting and securing the 4G adapter
7)
Switch on the inverter by following the procedure described in the manual.
8)
Unlike Wi-Fi cards, the 4G adapter does not need to be configured and starts transmitting data shortly after
the inverter is switched on.
15.3.2.
Verification
After installing the adapter, within the next 3 minutes check the status of the LEDs on the device to ensure that
the device is configured correctly.
Status of LEDs present on the adapter
1)
Initial status:
-
NET (left LED ): off
-
COM (central LED): flashing on
-
SER (right LED): flashing on