SP420/SP420-F
4x4 Dual Band 802.11ac Wave 2 Outdoor Access Point
QSG
3
Attach half-mounting bracket to the M-type bracket, then screw four Hex head machine bolts.
Securely tighten the screws.
Anti-theft steel rope (Optional accessory_SP-CBM5)
Insert three anti-theft screws (included in the
packaging) to the device through the
mounting bracket. Securely tighten these
three screws. Attach the clamp to encircle pole
and the mounting bracket. Securely tighten
the clamp.
Firstly, encircle the Anti-theft steel rope as
following left diagram, then encircle on the
pole. Secondly, insert the last anti-theft screw
(included in the packaging) to the device with
anti-theft steel rope. Securely tighten the
screw.
Grounding Connection & Protect from Lightning
1.
Make your device GND port connect to ground wire.
2.
The ground wire connects to the earth. In addition, the
grounding wire meets to 6-AWG copper grounding wire.
Note:
Be sure that grounding is available and that it
must comply with local and national electrical codes.
For additional lightning protection, use lightning
rods and lightning arrestors.
