SP420/SP420-F
4x4 Dual Band 802.11ac Wave 2 Outdoor Access Point
QSG
1
Package Contents
One outdoor access point
One clamp
Waterproof cable gland (*Note)
One ground wire
One mounting bracket
+ Four screws
Waterproof cable gland for
fiber port (*Note)
One quick setup guide
Note:
SP420 provides two waterproof cable glands, and SP420-F provides one waterproof
cable gland and one waterproof cable gland for fiber port.
Installation Requirements
TERMS OF USE: All Ethernet cabling runs must use CAT5e, 24 AWG (or above) Shielded Twisted
Pair (STP) cabling. In addition, please cut the cable into a proper length, strip the cables on both
ends, and crimp the wires into RJ45 connectors. It is the professional installer’s responsibility to
follow local country regulations, including operation within legal frequency channels, output power,
indoor cabling requirements, and Dynamic Frequency Selection (DFS) requirements.
Mounting the Access Point on the Pole
Place the mounting bracket to the device using
four screws (included in the packaging).
Securely tighten the screws.
Attach the clamp to encircle pole and
the mounting bracket. Securely tighten
the clamp.
Note:
Avoid having obstacles or metal plates surround the access point.
