Zcom AS420, Руководство пользователя

Страница: 61 / 71

AS420 4x4 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual
Page 61
Parameter Description
Interface
Select the interface for the static IPv4 route here. Options to choose
from are lan and wan.
Target
Enter the target IPv4 address or IPv4 network address for the static
IPv4 route here.
IPv4 Netmask Enter the IPv4 subnet mask for the static IPv4 route here.
IPv4 Gateway Enter the IPv4 address of the gateway for the static IPv4 route here.
Metric/MTU Enter the metric/MTU for the static IPv4 route here.
The following parameters are available in this section:
Parameter Description
Interface
Select the interface for the static IPv6 route here. Options to choose
from are lan and wan.
Target
Enter the target IPv6 address or network CIDR (Classless Inter-
Domain Routing) for the static IPv6 route here.
IPv6 Gateway Enter the IPv6 address of the gateway for the static IPv6 route here.
Metric/MTU Enter the metric/MTU for the static IPv6 route here.
4.3.3.5. Diagnostics
This page provides useful network utilities that can be used to troubleshoot network connectivity
between the AP and other networking nodes.
The following parameters are available in this section:
Parameter Description
Ping
To use the ping utility, enter an IPv4/IPv6 address or domain name in
the textbox and click the Ping button. The ping utility is used to send
an ICMP request to nodes to probe if the node is active or not.
Traceroute
To use the traceroute utility, enter an IPv4 address or domain name
in the textbox and click the Traceroute button. This is used to display
the route across the IP network and measure the transit delays of