Zcom AS420 Скачать руководство пользователя

Страница: 13 / 71

AS420

4x4 Dual Band 802.11ac Wave 2 Indoor Access Point

User Manual

Page 13

Status

4.3.1.

4.3.1.1.

Overview

This page is used to provide an overview of the software settings and status of the AP. Please refer

to page 10. The following parameters are available in the DHCP Leases:

Parameter

Description

Hostname

Displays the hostnames of active DHCP clients connected to the AP. DHCP

stands for Dynamic Host Configuration Protocol.

IPv4 Address

Displays the IP addresses of active DHCP clients connected to the AP. IP

stands for Internet Protocol.

MAC Address

Displays the MAC addresses of active DHCP clients connected to the AP.

MAC stands for Medium Access Control.

Lease Time Remaining Displays the DHCP lease time remaining for the DHCP clients connected

to the AP.

The following parameters are available in the DHCPv6 Leases:

Parameter

Description

Hostname

Displays the hostnames of active DHCPv6 clients connected to the AP.

IPv6 Address

Displays the IPv6 addresses of active DHCPv6 clients connected to the AP.

DUID

Displays the DUID (DHCP Unique Identifier) of active DHCPv6 clients

connected to the AP.

The following parameters are available in the Wireless section:

Parameter

Description

Generic 802.11bgn Wireless

Controller (wifi0)/(wifi1)

Displays information about the generic 802.11bgn wireless controller

(wifi0)/(wifi1).

SSID - Displays the SSID (Service Set Identifiers) for this wireless

interface. Click on the hyperlink to configure this wireless interface.

For more information, refer to Wireless Overview on page 45.

Mode - Displays the mode of the wireless interface.

Channel - Displays the wireless channel (frequency) hosted by this

wireless interface.

TX Power - Display the Wi-Fi transmit power from this wireless

interface.

Bitrate - Display the bitrate provided through this wireless interface.

The following parameters are available in the Associated Stations section:

Parameter

Description

Network

Click on the hyperlink to configure this wireless interface. For more

information, refer to Wireless Overview on page 45.

RX Rate

Displays the RX (receiving) data rate provided to/from the associated

wireless station.

TX Rate

Displays the TX (transmitting) data rate provided to/from the associated

wireless station.

Содержание AS420








































































Результаты поиска

Содержание AS420

Отзывы:

Похожие инструкции для AS420

Бренды по названию

Популярные бренды

Zcom AS420, Руководство пользователя

Результаты поиска

Содержание AS420

Отзывы:

Похожие инструкции для AS420

Бренды по названию

Популярные бренды