Zbtlink INC
When it fails to connect, you could check as below.
1)
：
If the hardware connect in right way?
>>The relevant LED to the PC must be on
2)
：
If your PC
’
s TCP/IP sets right?
>>If the IP of the device is 192.168.1.1 , your PC
’
s IP must be 192.168.1.xxx(xxx should
be 2~253)
4. Configuration Guide
n
4.1 Start and Login
The router provide the UI based on the IE, this solution could work in any MS Windows,
Macintosh or UNIX system . Run the browser, unable the VPN (if the VPN is working) , and then
input the 192.168.1.1 in browser. After doing that, you will see the login page, you should enter it
as the administer, which means you should enter the username: root /Password: admin , and
then click the
“
log in
”
The system of the ZBT-CSW-WR246 is OpenWrt
