7
Need help?
www.zBoost.com
Tech Support
877-594-5766
Mon.- Fri. Hours: 8:30 am to 5:30 pm EST
Safety and Recommendations
WARNING:
Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone.
WARNING:
Use only the power supply provided in this package. Use of a non-zBoost product may damage your
equipment.
WARNING:
To uphold compliance with network protection standards, all active wireless devices must maintain at least
18” of separation distance from mobile inside antennas, 4’ of separation distance from desktop antennas and
6’ of separation distance from Panel and Dome antennas.
WARNING:
The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 150
degrees Fahrenheit). It is not intended for use in attics or similar locations subject to temperatures in excess
of that range.
RF SAFETY WARNING:
Any antenna used with this device must be located at least 8 inches from all persons. The FCC
requires that a cell phone with cradle attached may only be used with the cradle mounted as illustrated in this
installation guide. A cell phone held near the ear must be without the cradle attached.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and
have your provider’s consent. Most wireless providers consent to the use of signal
boosters. Some providers may not consent to the use of this device on their network. If
you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the
manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a
licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for
calls served by using this device
.
This is a CONSUMER device.
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by zBoost could void the authority to operate this
equipment.
