background image

Before installing, please note the following important factors in determining your zBoost 
performance: 

 

 

At least 15 vertical feet is needed between the External Antenna (receives the outside 
signal) and the Indoor Antenna (rebroadcasts the signal indoors). Separation less than 
15 vertical feet will result in decreased performance. See illustration below.

 

 

Keep the External Antenna at least 3 feet above any metal.

  

 

STEP 1: Mount the External Antenna. Choose a location for the antenna using your cell 
phone to determine the area of strongest signal

The coverage your zBoost booster provides is largely determined by the strength of signal 
received by the External Antenna. 
 
To get the maximum benefit, you will want to take special care in pointing the External Antenna 
in the direction of best signal for your wireless service provider. If 
you are unsure of the direction of your provider's closest network tower, see the Antenna Aiming 
section of the User Manual or you may wish to use a YX699 RF signal meter to help during this 
process. Once you have determined the optimum location and angle, connect the L-bracket to the 
antenna and secure the antenna bracket to a mast (not provided) using the provided antenna 
hardware. 

STEP 2: Place the zBoost Base Unit where you want to create a Cell Zone.

 

Connect the Indoor Antenna to the Base Unit and place it where you need signal. For the widest 
possible signal area, position the Base Unit near the middle of a room. You may also mount it on 
an interior wall by first removing the bracket, screwing the bracket to a wall (screws not 
included), then snapping the Base Unit back in place keeping the Indoor Antenna vertical. The 
Base Unit uses an omni-directional Indoor Antenna that delivers signal in a circular pattern 
around the antenna. 

The zBoost TRIO SOHO Xtreme requires at least 15 feet of vertical separation between the Base 
Unit and the External Antenna. Generally, increasing this distance (up to 40 feet) will increase 
the performance and decreasing the distance will limit the performance. 

Keep the Base Unit off the floor and at least 2 feet away from other cords, metal objects or other 
wireless devices such as wireless routers or wireless access points. The zBoost TRIO SOHO 

Содержание SOHO










Отзывы: