4.
Move ANTENNAS away from any metal
surfaces or objects.
5.
Increase distance between BASE UNIT
and any phones or other electronic
devices.
6.
Plug the BASE UNIT power supply
back in.
7.
Wait 30 secs. for the BASE UNIT to
power cycle on.
For zBoost SOHO, Metro and Commercial Models beginning with YX
At Initial Power Up Only
Solid GREEN
Normal condition at power up.
Slowly Alternating
RED and GREEN
zBoost is working, but at reduced performance and coverage due to
“non-ideal” setup.
Solution: Increase the distance between External Antennas and
Indoor Antenna to achieve maximum performance and coverage.
Fast Flashing RED
Indicates insufficient distance between the External Antennas and the
Indoor Antenna. The amplifier is operating at significantly reduced
coverage.
Solution: Increase distance between Indoor Antenna and External
Antennas.
Solid RED
System is receiving signal from either the mobile device or the base
station transceiver that is too strong for proper operation.
Solutions: (1) Move away from receiving antenna with your cell
phone. (2) Move antenna away from other devices.
Fast Alternating RED
and GREEN followed
by no light
The amplifier is disabled.
Solution: Unplug and start over.
After Initial Power Up
Solid GREEN
Normal condition.
