Connecting Power
Plug in zBoost Base Unit only after coax cable and antennas are connected and tightened.
LED Base Unit Indicators
For zBoost SOHO, TRIO and REACH models beginning with ZB
During Initial Power Up
Light Mode
Status
Solution
Cycle RED,
GREEN,
ORANGE
System is powering up. Please
allow up to 30 seconds.
N/A
Flashing
GREEN
There is an issue with the
installation. BASE UNIT will flash
GREEN once for every 2 dB less
than optimal signal gain.
Coverage decreases more with
each flash.
1.
Unplug the BASE UNIT power supply.
2.
Relocate the EXTERNAL ANTENNA to
pick up the strongest signal from
your wireless carrier.
3.
Increase the height difference between
the EXTERNAL ANTENNA and
INDOOR ANTENNA as much as
possible. The antennas require a
minimum 15 ft. of vertical separation
(height difference).
4.
Plug the BASE UNIT power supply
back in.
5.
Wait 30 secs. for the BASE UNIT to
power cycle on.
After Initial Power Up
Light Mode
Status
Solution
SOLID
GREEN
zBoost is ready.
N/A
Flashing
GREEN
zBoost is detecting signal from
your phone.
Normal operation.
If no phones are turned on and light still
flashes, the booster could be picking up
noise. Move booster away from any
