Read Care and Handling of the Glass Tank
(over page) before proceeding.
Place the stand where you will sit
your System.
Place the Glass Tank gently onto the Stand.
Place the tap “A” through hole in the lower
tank with a silicon washer “B” on each side.
Screw the magnetic back “C” onto tap inside
the bottom tank and tighten.
Gently place pre-soaked Silver Stones and
Mineral Stones ONE AT A TIME into the Glass
Tank.
*If you have Alkalinity Enhancers (AAE)
balls sprinkle amongst the stones away from
the back of the magnetic tap so they can’t get
sucked into the back of the tap.
Screw the Multi-Stage Filter Cartridge into
Cartridge Connector and gently sit in the top
of the glass tank (filter will hang in lower tank).
Place the silicon washer* onto the Ceramic
Filter stem and then insert the Ceramic Filter
into the hole inside the Upper Tank. Fasten on
with the Filter Nut* and tighten.
Gently place the Upper Tank onto the
assembled Glass Tank.
Fill Upper Tank with 4 litres of water and
pop on the Lid.
^
You will have 2 spare parts left over: 1 x BPA
Free Bottom Tank & 1 x Middle Rim (not used
with the Glass Tank). When you travel on
holiday remember to pack your zazen Water
System in your car using the BPA Free bottom
tank instead of the Glass Tank.
^Note: It will take 1½ to 2 hours to filter the 4 litre upper tank
into the lower tank. Do this twice to fill your system. Once the
lower tank is full, you cannot add more water to the upper tank
or the system will overflow.
*Washer & nut come with Ceramic filter
CERAMIC FILTER
SILICONE WASHER
UPPER TANK
FILTER NUT
CARTRIDGE CONNECTOR
O-RING
MULTI-STAGE FILTER CARTRIDGE
LID
A - TAP
B - SILICONE WASHERS
C - MAGNETIC BACK
A
B B
C
GLASS BOTTOM TANK
STAND
SILVER & MINERAL STONES
9
7
8
6
5
3
2
4
SCAN TO VIEW
OUR ONLINE
INSTALLATION VIDEOS
1
2
3
4
5
7
6
8
9
10
Installation & Care Guide
Assembling your zazen Alkaline Water System
with optional Glass Bottom Tank
[email protected] | 1300 78 24 25 | zazen.com.au
5
