zaxe X3, Руководство пользователя

Страница: 14 / 56

4. Introduction
14
Calibration
Table calibration should be done when you use your 3D printer for the first time. When you
move it or when you use it for a long time. Bad table calibration can cause many problems
and it may even cause your device to be out of service. Make sure your table calibration is
correct.
If the print doesn't stick to the printing surface or if there isn't any extrusion on the first
layer while it prints, it is generally because of bad table calibration. In case of such an
event, please follow the instructions below.
Choose Settings > Bed Calibration
When the calibration process starts, all axes will return to their starting positions. After
the print head and table heats up, your 3D printer will automatically calibrate the print
table in a couple of minutes.