Zaxcom ZFR200, Руководство пользователя

Страница: 20 / 29

Zaxcom ZFR 200 /
300 Manual____ _______________ ___ ___
Extended Menu
19
Low Battery Stop
This menu sets the amount of time after a low battery warning the ZFR will close the current file and
stop recording.
This is to prevent possible file corruption if the battery becomes low.
•
NEVER STOP - the ZFR will not stop till you stop it.
•
Any interval from 1 to 99 minutes - once the battery indicator starts to blink a low battery
warning the ZFR will continue to record for the time set in the menu - then it will close the file and
stop recording.
Record On Bootup
This menu will determine if the ZFR will automatically go into record after the unit boots up.
•
ON - the ZFR start to record after it boots up.
•
OFF - the ZFR will wait for a ZaxNet command, a manual record trigger to start recording.
Name
NAME:SN
1
234
This menu changes the name of the ZFR.
The name entered into the unit becomes part of the name of the audio files generated by the
unit and is also included in the metadata of the BWF file. Naming the unit aids in identifying the
files from several different ZFR’s
The maximum Name length is 8 characters. You can select any letter or number and can even
use spaces.
To set/change the name :
1. Press the INC or DEC
key
to change the character in the current position.
2. Press the MENU
key
to proceed to the next character.
3. When finished, press and hold the MENU
key
set the name and leave this page or you can
cycle the power.
NAME: SN1234
LOW BATT STOP:
NEVER STOP
RECORD ON BOOTUP
ON
LOW BATT STOP:
5 MINUTES