Zaxcom ZFR 200 / 300 Manual
___________________ _______
Main Menu
9
Format Recording Card
This page will allow you to erase and format the micro SD card.
NOTE
: This page will only appear if a card was inserted prior to booting up the ZFR. Also if the card
is removed this page will not appear.
To Format a Card:
1.
Before formatting the card, you may want to name the ZFR. Naming the card makes it easier to
differentiate files from different recorders for example you name the card with the talents name.
2.
With the power ‘OFF’, insert the memory card into the media slot with the label to the back of the
unit. Press it all the way in till it “clicks”.
3.
Power up the ZFR
4.
Press the
MENU
key
7 times until the screen displays
“
PRESS UP KEY 5X TO ERASE CARD”
.
5.
Press the
INC
key
5 times.
6.
You will see
“FORMATTING FAT 32”
7.
The ZFR will displays “
SUCCESS”
or “
FORMAT FAILED ERROR”
8.
If
“SUCCESS”
appears you can power cycle the ZFR and you are good to go.
Time Left / Used
This page displays the remaining time left on the card and the time already recorded on the card
.
NOTE:
If you see a “FORMAT FAILED ERROR” try re-formatting the card and if it fails again do not
use that card in the ZFR.
NOTE:
Even though many cards are sold preformatted, you must reformat it in the ZFR prior to
recording. Only cards formatted in the unit will work properly.
PRESS UP KEY 5X
TO ERASE
CARD
TIME LEFT 20H
TIME USED 4H
Содержание ZFR200
Страница 1: ......
