Zaxcom ZFR100, Руководство пользователя

Страница: 15 / 28

ZFR100 Recording System Owner’s Manual Chapter 2
11
Setting the ZFR100 Name
The name set into the ZFR100 becomes part of the file name of the audio files generated by the
ZFR100. It is also included in the metadata. 8 characters are provided for the ZFR100 name. The
ZFR100 name will appear for a few seconds on power up in the LCD display window.
Setting the ZFR100 name
1. Press and hold the menu key as the ZFR100 is powered up.
2. Release the menu key when the unit has fully initialized.
3. Press the menu key repeatedly until NAME: appears in the display with an arrow pointing to
the first character.
4. Press the up and down arrow keys to change the character that the arrow is pointing to.
The characters A-Z and 0 to 9 are the available characters.
5. Press the menu button to proceed to the next character.
When finished press and hold the menu button to leave this function or power down the ZFR100
and the power it on to resume normal operation.
Transport Control Menu
Press the menu key on the ZFR100 until the transport status is located on the left side of the display.
The current transport time code is displayed. When in this menu it is possible to stop the ZFR100
from recording and to play back recorded material.
Pressing the Down arrow key places the ZFR100 into stop mode. While in stop mode the playback
pointer can be moved backwards by pressing the down arrow key.
Pressing the UP arrow key places the ZFR100 into play mode. While in play mode the playback
pointer can be moved forwards by pressing the up arrow key.
The current playback time code is displayed in the transport control menu.
Leaving the menu by pressing the Menu key returns the ZFR100 to the record mode at the last
location on the memory card that was recorded to.
Dual Color LED
The dual color LED on the top of the ZFR100 confirms the transport status of the recorder.
LED status indicators.
o
Solid green – ZFR100 is in stop or playback mode.
o
Green and flickers red – ZFR100 is in record mode.
o
Flashing Red – indicates there is less than 10 minutes of recording time left on the memory
card. This will never be seen in loop record mode.
o
Solid red – ZFR100 has lost communication. Check the SD card, usually it has come out of the
SD slot, it is full, or has not been formatted correctly.